Water Jet Pump, polypropylene

Water Jet Pump, polypropylene
Suitable for most laboratory water pressures
Integrated non-return valve increases safety
Detachable vacuum connection - accepts 6-9mm bore tubing
Supplied with water inlet hose connection and R 3/4" threaded tap connectors, with R 1/2" reduction adapter
Water inlet hose connection accepts 10-12mm bore tubing
Very low water consumption: 190 litre/h at 3.5 bar water supply pressure
A pressure of 16 mbar (water temperature of 12?C) is achievable with a water supply pressure from 3 to 6 bar
High suction capacity with a flow rate of approx. 400 litres/h of air (at 1 atm and water supply pressure of 3.5 bar at 12?C)
NOTE: Jubilee clips are recommended to fix tubing into position.